>> For heating mirrors to eliminate condensation from steamy baths & showers.
Mirror Demister is designed to eliminate mirror condensation from steamy baths or showers. Mirror Demister works by ensuring that the mirror is at least 10 to 15 degrees warmer than the ambient temperature of the bathroom.
The 2mm thin self adhesive mirror heater pad is simply bonded to the back of the mirror by removing the backing paper and gently smoothing it onto the rear of the mirror.
The mirror demister is powered by a 230V connection to your bathroom light circuit, ventilation fan or together with the floor heating through a dual zone controller. When the bathroom light is switched ON (or fan or programmable controller) the mirror will warm up and keep clear while the bathroom is in use.
A thin heating element is uniformly spaced out and sandwiched between reinforced aluminium sheets. The heating element terminates to 1.8m length from one corner of the heat pad.
>> Heating Element Thickness: 2mm
>> Size (Length x Width): 0.6m x 0.4m
>> Watt: 36W
>> Amp: 0.2A
>> Voltage: 230V